TopL TopM TopR
MiddleL
## ## >> RV-7A PROJECT FOR SALE - Tuesday, November 29, 2011

-

80% complete - All Kits


0-360 Engine - - new with prop governor

Long Range Tip Tanks

Tip-up Canopy

 Needs Propeller, Finishing & Paint - - No Instruments or Avionics included.

 $30,000.00

 Call John 775-781-9139

 
## ## >> JURCA MJ-5 SIROCCO FOR SALE - Tuesday, October 18, 2011

FOR SALE

JURCA MJ-5 SIROCCO – N616RB

 


 

THIS MJ-5 SIROCCO IS A TWO-PLACE, TANDEM, LOW WING, FIXED-GEAR PLANS-BUILT HOMEBUILT AIRCRAFT OF FRENCH DESIGN, DESIGNED FOR AEROBATICS AND WW-II FIGHTER-LIKE HANDLING.

The MJ-5 was designed in the 60’s by Marcel Jurca, with its first flight in 1962.  Marcel Jurca, a Romanian who emigrated to France following WW-II, was a frustrated wanna-be fighter pilot, and after the war, wanted to create that same flight experience in a light civilian aircraft that homebuilders could construct.  He designed the MJ-5 using wooden fuselage, spar and wing structures covered with thin plywood and fabric, similar to some other homebuilt designs of that time

N616RB was built by Reuben Berg of Fullerton, a former member of Chapter 92, and had its first flight on September 17, 1982.  The aircraft has been lightly used, with only 334 total airframe and engine hours, has been hangared throughout its life and is currently located at Chino Airport.  It is equipped with a Lycoming O-290-D2, 140 Hp engine and a fixed pitch propeller, and cruises at 150 mph, stalls at 59 mph, with the typical approach at 80, and over the fence speed of 70-75.  Empty weight is 1057 lbs; gross at 1580 lbs with 19 gal of fuel.  The panel is equipped with basic VFR instrumentation, including nav/com and transponder.  The last annual condition inspection was in October, 2010.  Asking $20,000.

For further information, contact:

Michael Webb

mandkwebb@sbcglobal.net


FOR ADDITIONAL SPECIFICATIONS AND PHOTOS, INCLUDING CUTAWAY VIEWS OF THE CONSTRUCTION DETAILS, CLICK "read more" BELOW.

 read more ...
## ## >> FREE 50% OWNERSHIP -Lancair 235 - Saturday, September 17, 2011

Offering Free 50% Partnership as listed or Outright Sale (asking $25,000).  Includes honeycomb rib / bulkhead material (pre-pregged), 4' x 8 ' work table with teflon cutting surface, O-235-C1 engine (900 SMOH) on engine stand,  50-gal compressor, air tools, etc For more details, click "read more" below..

Mike Sawicki
951 / 575-5452
 read more ...
## ## >> TRAILER FOR LOAN - Monday, April 11, 2011

 

My trailer is presently in my workspace at the Builder Center and is available for the other members' use.  It is a converted boat trailer about 20 feet in length covered with plywood.  The plywood covers about 17.5 feet of its length. The light wiring needs some work......I use a set of U-Haul lights which magnetically attach to the fenders.  Anyone wishing to use it can contact me by phone at 818 613-5295 - - Charles Coleman

 
## ## >> COMPLETE REVMASTER ENGINE FOR SALE - $4200 OBO - Monday, March 07, 2011

 
Revemaster engine for sale. Engine is ready to be installed. Engine has less than 50 hours. It was only taxied around for a project that never flew. Engine has been preserved in pristine condition but will most likely need a few gaskets replaced. I bought it for a project but got another project so I am giving this up. I will assist/pay for shipping. Feel free to email me with questions or offers.
Thanks - Sam Ajayi  850-384-6833  soajay@hotmail.com

 

 

 

 

 

 
MiddleR
BottomL BottomM BottomR